Security Camera Enclosures and Mounts

The design intent of this Level #4 camera enclosure is to implement the video surveillance and recording in potentially hostile locations and environments with the possibility of equipment damage due to level 4 weapons fire.

Most Suitable Locations

• Coastal regions with the high risks of hurricanes, flooding and salt vapor
• High incidence of tornado locations
• Military installations, correctional facilities
• Border surveillance
• High crime city locations
• Red and Green areas in war zone situations

These enclosures are constructed using ¼” high carbon steel plate, and the camera viewing portal is 1¼ “ Lexguard polycarbonate. Both materials have a ballistic rating of level #4 which will resist penetration from a * (.30 Caliber Rifle Lead Core Soft Point; .30-06 Caliber).
* Ratings of Bullitt Resistant materials as identified by UL 752

Specifications for Standard Features

• ¼” Steel plate construction
• Sealed 1 ¼” Lexguard view window
• Continuous weldments
• Stainless Steel Pan/ Tilt mounting bracket and hardware designed to accommodate either a 1 ½” or 2” NPT nipple
• Stainless steel dual action hinge mechanism for bottom drop door access
• Stainless steel three (3) axis adjustable camera mounting bracket
• Thermostatically controlled fan and mounting brackets with four pin terminal block (24VAC-12VDC)
• Dual hole access for ¾” NPT nipple (Rear of enclosure location)

Optional Accessories

• Heater strip (24VAC)
• Custom color request (standard finish: Gloss white powder coat)
• Custom hole access location/ diameter

Return to Top

The sole design intent of this pressurized stainless steel camera enclosure is for the surveillance and recording in harsh and extraordinary environments with minimal maintenance.

Most Suitable Locations

• Coastal regions with the high risks of hurricanes, flooding and salt vapor
• High incidence of tornado locations
• Military installations, correctional facilities
• High levels of air-born dust, moisture and metal particles: Sub-way platforms, factories, tunnels, bridges
• Border surveillance

The design intent of this Level #3 “Wireless Transmitter Enclosure” is to be used in conjunction with our level 4 camera enclosure (Model OCEBE-2007-250) where hard wire connection is not possible. The function of this particular housing is to implement the video surveillance and recording in potentially hostile locations and or environments without the possibility of damage due to level 3 weapons fire.

Most Suitable Locations

• Coastal regions with the high risks of hurricanes, flooding and salt vapor
• High incidence of tornado locations
• Military installations, correctional facilities
• Border surveillance
• High crime city locations
• Red and Green areas in war zone situations

These enclosures are constructed using 7 gauge (.190 thick) high carbon steel plate. The chosen material has a ballistic rating of level #3 which will resist penetration from a * (.44 magnum Lead Semi-wadcutter Gas checked).
* Ratings of Bullitt Resistant materials as identified by UL 752

Specifications for Standard Features

• 7 gauge (.190 thick) armor plate construction
• Continuous weldments
• Mounting hole pattern located on rear of enclosure for 1 ½”- 2” pipe clamps
• Stainless steel hinge for left or right hand front door access
• Custom stud pattern for internal mounting of equipment specified by customer
• Dual hole access for ¾” NPT nipple (Bottom of enclosure location)

Optional Accessories

• Heater, fan and thermostat assembly (24VAC)
• Custom color request (standard color is Gloss white)
• Custom hole access location/ diameter

Return to Top

These particular camera enclosures are suitable for indoor or outdoor applications.  The design intent is to access the enclosure from either side for camera and component service.  Under certain installation conditions, one side or the other access is an only option.  Fabricated using 14 gauge 304 type stainless steel, these enclosures are designed to be weather tight and hold up to rigors of extreme weather condition and any potential onslaught of vandalism.

A standard feature of both versions include a totally adjustable pan and tilt mounting bracket designed for turning onto a 2” NPT pipe nipple.  Once positioned for viewing, the bracket can be locked into place with a tamper proof set screw and also by drilling and tapping them a pre-punched hole for a 10-32 screw.

Other features include keyed alike cam locks, stainless steel tamper proof hardware and an adjustable internal camera mounting bracket.  The viewing window is comprised of tempered glass externally and a clear polycarbonate panel internally.  Each lens measures ¼” in thickness.

To convert for outdoor use, an optional fan kit can be added. This installation is preformed by simply removing the standard rear mounted cover plate and replacing it with the louvered fan panel kit. This kit comes pre-wired with a 24VAC axial fan, thermostat, wiring terminal block and all necessary hardware for the conversion.

These particular camera enclosures are suitable for indoor or outdoor applications. The design intent is to access the enclosure from the underside for camera and component service. Under certain installation conditions, bottom access is an only option. Fabricated using 14 gauge 304 type stainless steel, these enclosures are designed to be weather tight and hold up to rigors of extreme weather condition and any potential onslaught of vandalism.

A standard feature of both versions include a totally adjustable pan and tilt mounting bracket designed for turning onto a 2” NPT pipe nipple. Once positioned for viewing, the bracket can be locked into place with a tamper proof set screw and also by drilling and tapping them a pre-punched hole for a 10-32 screw.

Other features include a cam lock, stainless steel tamper proof hardware and an adjustable internal camera mounting bracket. The viewing window is comprised of tempered glass externally and a clear polycarbonate panel internally. Each lens measures ¼” in thickness.

To convert for outdoor use, an optional fan kit can be added. This installation is preformed by simply removing the standard rear mounted cover plate and replacing it with the louvered fan panel kit. This kit comes pre-wired with a 24VAC axial fan, thermostat, wiring terminal block and all necessary hardware for the conversion.

Typical installation locations include municipal, government, and institutional perimeter building surveillance, train and subway platforms, bridges, tunnels, intersections, interstate highways.

Installation instructions are included with all shipped containers related to this product.

Return to Top